Overview of Antenna Analyzers
2024-02-14 >> Rev 2024-02-16
This is for the benefit of those that either are not familiar with Antenna Analyzers, or even those who are unfamiliar with these particular Antenna Analyzers.
Analyzers Shown:
Antennas and other Equipment in these tests:
Vertical 6-Band Trap Antenna (6BT)
6Mtr / 2Mtr / 440 Beam
6Mtr Vertical
- - - - - -
Base-Load Matchbox(at the base of the 6BT Vertical) - MFJ-300W
MFJ-269 On The 6-Band Vertical
RigExpert AA600 Keypad of the RgExpert AA-600
RigExpert AA600 On The 6-Band Vertical (6BT)
15Mtr - (Below Band) Show Band Limit
80Mtr - Band Edges 80Mtr - Resonance off center 80Mtr - Pointer Moved 80Mtr - ReScanned
AEA CIA-HF: - Stand Alone or with CPU (32-Bit OS Only)
Reg #WA7RSO RegNumber 25650360 2/18/2002 5013-1201 Version 1.08
AEA CIA-HF Operation
- F1 key - Toggle User Menu ON or OFF
- F2 key - Toggle Grid ON or OFF
- F3 key - Change Data
- F4 key - Toggle Zoom (Change SWR Scale)
- F5 key - Toggle Screen
- (More>
- (Select by Enter key)
- Width
- Change Sweep Width (by desired Frequency Width as with a Key Value and then press "INPUT")
- Freq
- Change Center Frequency (by desired Frequency as with a Key Value and then press "INPUT")
- Exam-Plot
- Freeze Display
Special Note: It may happen that when first turned on, that the LCD Display is so dark that it’s almost unreadable.
If that happens, press the F1 (Menu Key), then press the Dual-Purpose “WIDTH” KEY 2 times, to select the “LCD Contrast” selection.
Then press repeatably the Dual-Purpose “FREQUENCY DN Key” to Brighten the display.
Contrast (LCD Contrast – no Backlight) {be careful *}
Change by the Dual-Purpose “FREQ” Key, by Up (Darken)
Change by the Dual-Purpose “FREQ” Key, by Dn (Lighten)
{ * if the LCD Screen is unreadable, press the FREQ KEY “DN” for #times necessary }
SWR:3.0
Change by the Dual-Purpose “FREQ” Key, by Up to increase the SWR Range.
Change by the Dual-Purpose “FREQ” Key, by Dn to decrease the SWR Range.
( available later for plot )
SWR:1.2
Change by the Dual-Purpose “FREQ” Key, by Up to increase the SWR Range.
Change by the Dual-Purpose “FREQ” Key, by Dn to decrease the SWR Range.
( available later for plot )
Meter: Press the F1 Key, and the use the WIDTH Key to scroll down to METER, then press ENTER
Displays the Battery condition
Extra Features = ON (OFF) Press to Turn ON or OFF
VF:99 (SHORT)
AEA Bravo Stand Alone or with CPU (32-Bit OS Only)
2003 6014-1201WA7RSO Reg Number 58952277
UHF Connector Backlight LCD Readout (use the USB to Serial Convertor if necessary)
AEA Bravo On The 6-Band Vertical
AEA Echo
2007-2011 Vers1:3:4VIA ECHO PC VISION V 2010.3
AEA Echo on the 6-Band Vertical
todo