### Special Effects for Capacitors & Inductors with Variable Constant Current Sources:

11/04/2001

Special Notes:

• "Constant Current Sources" are often misunderstood. We need to remember that a "Constant Current Source" is by definition a source that will maintain a set value of current, with whatever range of voltage is required to do so under various load changes.
• A "Constant Current Source" can be adjusted to new values of current, in gradient changes, step changes, or even sine wave changes, and still be referred to as "Constant Current Source" to the fixed or variable load conditions.
• By varying the settings of this "Constant Current Source" as it is applied to Reactive Loads, we can discover some very interesting and revealing phenomenon about Capacitive Reactance and Inductive Reactance.

#### Particularly notice the difference between the "Reaction" of a Capacitor to the same variation of a "Constant Current Source" output, v.s. the "Reaction" of an Inductor to that same variation of current:

• When the source maintains a fixed value of current to the capacitor, the voltage across the capacitor increases in a "Linear" fashion, whereas that same fixed value of current through an inductor produces "no change" (remember that an inductor responds to changes in current).
• When the source current increases or decreases linearly through an inductor, the inductor produces a fixed "Step CEMF" voltage.
• A "Sine-Wave" variation of current from a "Constant Current Source" applied to a capacitor will result in a charging voltage across the capacitor to fall behind the current variation by 90o!
• A "Sine-Wave" variation of current from a "Constant Current Source" applied to an inductor will result in a CEMF that will lead the current variation by 90o!
• This totally different illustration of the relationship of those 90o phase angles is often referred to as "ELI v.s. ICE", to relate that in an inductive circuit the voltage always leads the current, and in a capacitive circuit, the voltage always lags the current.

• Of special interest is that presenting a varying "Constant Current Source" in the form of a Square Wave to a capacitor will produce a Triangular Wave output from the capacitor, (25Kb PDF File)
whereas presenting a varying "Constant Current Source" in the form of a Triangular Wave to an inductor will produce a CEMF Square Wave output from the inductor. (28Kb PDF File)
• This factor is one more situation of where a capacitor behaves in the exact opposite of an inductor.
(Compare those illustrations with this combined PDF File, 71Kb)

• For some REALLY SPECIAL considerations, look at what happens when we feed these irregular variations from a "Current Source" into an Inductor or a Capacitor ("Special" 66Kb PDF file):
• Contrasts between an Inductor and a Capacitor, when the current is unchanging:
• The CEMF across the Inductor drops to zero.
• The voltage across the Capacitor will continue to change, by either increasing or decreasing.
• Contrasts between an Inductor and a Capacitor, when the supply current increases:
• The CEMF across the Inductor will increase proportionally in opposition to the increase in current.
• The voltage across the Capacitor will increase at a higher proportionate rate.
• Contrasts between an Inductor and a Capacitor, when the supply current decreases:
• The CEMF across the Inductor will reverse polarity to aid the current flow, in opposition to the decrease in current.
• The voltage across the Capacitor will still increase, but by a proportionate lesser rate.
• Contrasts between an Inductor and a Capacitor, when the supply current is reversed, but unchanging:
• The CEMF across the Inductor simply drops to zero.
• The voltage across the Capacitor will decrease, but when it reaches 0V, it will begin charging in the opposite polarity.

• Remember that an Inductor reacts to Changes in Current, but does not react if the current stays the same.
• A Capacitor will Keep Changing the Voltage across it when fed with a charging or discharging current, but will maintain the current voltage when the current supply is zero.
• Note especially that the "Roles" of an Inductor vs. a Capacitor seem to be the opposite of each other, in their "Reactions" to Current Sources.

• L&CSpecialEffects.html - SfE-DCS, ddf - 11/04/2001